NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under Interface Configuration, scroll down to interface 2/0/11 and select the checkbox for that
interface. 2/0/11 now appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.0.
•
Select the Enable in the OSPF Admin Mode field.
c.
Click Apply to save the settings.
6. Enable OSPF on the port 2/0/19.
a.
From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 8-22
b. Under Interface Configuration, scroll down to interface 2/0/19 and select the checkbox for that
interface. 2/0/19 now appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.1.
•
Select the Enable in the OSPF Admin Mode field.
c.
Click the Apply button to save the settings.
7. Configure area 0.0.0.1 as a stub area.
a.
From the main menu, select Routing > OSPF > Advanced > Stub Area Configuration. A screen
similar to the following displays.
Figure 8-23
OSPF
v1.0, October 2009
8-20