NETGEAR FSM7328SNA Administration Manual page 440

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under PVID Configuration, scroll down to interface 1/0/1 and select the checkbox for 1/0/1.
c. In the PVID Configuration enter 500 in the PVID(1 to 4093) field.
d. Click Apply to save the settings.
4. Enable IPv6 forwarding and unicast routing on the switch.
a. From the main menu, select Routing > IPv6 >Basic>Global Configuration. A screen similar to the
following displays.
Figure 27-9
b. Next to the IPv6 Unicast Routing, select the Enable Radio button.
c. Next to the IPv6 Forwarding, select the Enable Radio button.
d. Click Apply.
5. Enable IPv6 routing on the VLAN
a. From the main menu, select Routing > IPv6 >Advanced>Interface Configuration. A screen similar
to the following displays.
Figure 27-10
27-9
v1.0, October 2009
IPv6 Interface Configuration