NETGEAR FSM7328SNA Administration Manual page 457

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Routing > Multicast >PIM-SM->Interface Configuration. A screen
similar to the following displays.
Figure 28-19
b. Under PIM-SM Interface Configuration, scroll down to interface 1/0/10 and select the checkbox for
1/0/10. Then select the interface 1/0/11.
c. In the PIM-SM Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
On Switch C:
To use the Web interface to config PIM-DM, proceed as follows:
1. Enable IP routing on the switch.
a. From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
PIM
v1.0, October 2009
28-16