NETGEAR Managed Switches Software Administration Manual, Release 8.0
c.
Click Add. The Extended ACL Rule Configuration screen displays.
Figure 11-36
d. Under Extended ACL Rule Configuration (100-199), enter the following information and make the
following selections:
•
In the Rule ID field, enter 1.
•
Next to Action mode, select the Deny radio button.
•
Select False in the Match Every field.
•
In the Destination IP Address field, enter 192.168.24.0.
•
In the Destination IP Mask field, enter 0.0.0.255.
e.
Click Apply to save the settings.
9. Add and configure an IP extended rule that is associated with ACL 102:
a. From the main menu, select Security > ACL > Advanced > IP Extended Rules. A screen similar to
the following displays.
11-34
v1.0, October 2009
Access Control Lists (ACLs)