NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > Multicast >PIM-DM->Global Configuration. A screen
similar to the following displays.
Figure 28-26
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
8.
Enable PIM-DM on the interface 1/0/21 and 1/0/22.
a.
From the main menu, select Routing > Multicast >PIM-DM->Interface Configuration. A screen
similar to the following displays.
Figure 28-27
b. Under PIM-DM Interface Configuration, scroll down to interface 1/0/21 and select the checkbox
for 1/0/21. Then select the interface 1/0/22.
c.
In the PIM-DM Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
PIM
v1.0, October 2009
28-20