NETGEAR FSM7328SNA Administration Manual page 166

NETGEAR Managed Switches Software Administration Manual, Release 8.0
• Select TCP in the Protocol Type field.
• In the Source IP Address, enter 192.168.77.0.
• In the Source IP Mask, enter 0.0.0.255.
• In the Destination IP Address, enter 192.178.77.0.
• In the Destination IP Mask, enter 0.0.0.255.
b. Click Apply to save the settings.
4. Create another ACL rule and add it to the ACL 101.
a. After you click the Add button on the step 3, A screen similar to the following displays.
Figure 11-5
b. Enter the following information in the Extended ACL Rule Configuration.
• In the Rule ID(1 to 23) field, enter 2.
• Next to the Action, select Permit radio button.
• Select the UDP in the Protocol Type field.
• In the Source IP Address, enter 192.168.77.0.
• In the Source IP Mask, enter 0.0.0.255.
• In the Destination IP Address, enter 192.178.77.0.
• In the Destination IP Mask, enter 0.0.0.255.
c. Click Apply to save the settings.
5. Apply the ACL 101 to the port 2.
a. From the main menu, select Security > ACL >IP ACL> IP Binding Configuration. A screen similar
11-6
v1.0, October 2009
Access Control Lists (ACLs)