NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-33
b. Select 1/0/22 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
7.
Enable rip on the interface 1/0/24.
a.
From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-34
b. Select 1/0/24 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8.
Enable multicast globally.
PIM
v1.0, October 2009
28-24