NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > OSPF > Advanced> OSPF Configuration. A screen similar
to the following displays.
Figure 8-5
b. Under the OSPF Configuration, enter the following information:
•
In the Router ID, enter 192.150.9.9.
•
Select Enable in the OSPF Admin Mode field.
•
Select Disable in the RFC 1583 Compatibility field.
c.
Click the Apply button to save the settings.
5. Enable OSPF on the port 1/0/2.
OSPF
v1.0, October 2009
8-6