NETGEAR FSM7328SNA Administration Manual page 363

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Enter the following information in the Syslog Configuration.
Next to the Admin Status, select the Enable radio button.
c. Click Apply.
2. Configure the Command Log
a. From the main menu, select Monitoring > Logs >Command Log.
Figure 18-3
b. Enter the following information in the Command Log.
Next to the Admin Status, click the Disable radio button.
c. Click Apply.
3. Configure the Console Log.
a. From the main menu, select Monitoring > Logs >Console Log.
Syslog
v1.0, October 2009
18-3