NETGEAR FSM7328SNA Administration Manual page 306

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Enable guest vlan on port 1/0/1 and 1/0/24.
(Netgear Switch) #show dot1x detail 1/0/1
Protocol Version............................... 1
PAE Capabilities............................... Authenticator
Control Mode................................... auto
Authenticator PAE State........................ Authenticated
Backend Authentication State................... Idle
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Guest VLAN ID.................................. 2000
Guest VLAN Period (secs)....................... 90
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
VLAN Id........................................ 2000
VLAN Assigned Reason........................... Guest
Reauthentication Period (secs)................. 3600
Reauthentication Enabled....................... FALSE
Key Transmission Enabled....................... FALSE
Control Direction.............................. both
Maximum Users.................................. 16
Unauthenticated VLAN ID........................ 0
Session Timeout................................ 0
Session Termination Action..................... Default
Web Interface: Creating a Guest VLAN
To use the Web interface to create a guest VLAN, proceed as follows:
1. Create VLAN 2000.
a. From the main menu, select Switching > VLAN >Basic > VLAN configuration. A screen similar to
the following displays.
15-22
v1.0, October 2009
Security Management