NETGEAR FSM7328SNA Administration Manual page 134

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under Interface Configuration, scroll down to interface 2/0/11 and select the checkbox for that
interface. 2/0/11 now appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.0.
• Select the Enable in the OSPF Admin Mode field.
c. Click Apply to save the settings.
6. Enable OSPF on the port 2/0/19.
a. From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 8-35
b. Under Interface Configuration, scroll down to interface 2/0/19 and select the checkbox for that
interface. 2/0/19 now appears in the Interface field at the top.
• In the OSPF Area ID field, enter 0.0.0.1.
• Select the Enable in the OSPF Admin Mode field.
c. Click Apply button to save the settings.
7. Configure area 0.0.0.1 as a nssa area.
a. From the main menu, select Routing > OSPF > Advanced> NSSA Area Configuration. A screen
similar to the following displays.
Figure 8-36
8-29
v1.0, October 2009
OSPF