NETGEAR FSM7328SNA Administration Manual page 30

7000 series managed switch administration guide for software version 8.0

Table of Contents

NETGEAR Managed Switches Software Administration Manual, Release 8.0

Enter a new password in the Password field and then retype it in the Confirm Password field.

Note: If SNMPv3 Authentication is to be used for this user, the password must be

eight or more alphanumeric characters.

5. If you do not need authentication, go to Step 9.

6. To enable authentication, in the Authentication Protocol field select either MD5 or SHA for the

authentication protocol.

7. If you do not need encryption, go to Step 9.

8. To enable encryption select DES for the encryption scheme in the Encryption Protocol field. Then, enter

in the Encryption Key field an encryption code of eight or more alphanumeric characters.

9. Click Apply.

v1.0, October 2009

Getting Started