NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > Multicast >PIM-SM->Global Configuration. A screen
similar to the following displays.
Figure 28-57
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
8.
Enable PIM-SM on the interface 1/0/10 and 1/0/11.
a.
From the main menu, select Routing > Multicast >PIM-SM->Interface Configuration. A screen
similar to the following displays.
Figure 28-58
b. Under PIM-SM Interface Configuration, scroll down to interface 1/0/10 and select the checkbox for
1/0/10. Then select the interface 1/0/11.
PIM
v1.0, October 2009
28-42