NETGEAR Managed Switches Software Administration Manual, Release 8.0
d. Click Apply to save the settings.
3. Assign IP address 192.150.3.1 to the port 1/0/3:
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 8-4
b. Under IP Interface Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. Now 1/0/3 appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.150.3.1.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable in the Admin Mode field.
d. Click Apply to save the settings.
4.
Specify the Router ID and Enable OSPF for the switc.h
8-5
v1.0, October 2009
OSPF