NETGEAR FSM7328SNA Administration Manual page 296

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under IP Configuration, make the following selections:
• Next to Routing Mode, select the Enable radio button.
• Next to IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP Routing.
5. Configure default route for VLAN 202:
a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen
similar to the following displays.
Figure 15-10
b. Under Configure Routes, select DefaultRoute in the Route Type field.
c. Under Configure Routes, in the Next Hop IP Address field, enter 10.100.5.252.
d. Click Add to add the route that is associated to VLAN 202 to the Learned Routes table.
6. Configure port 23 and port 24 as protected ports:
a. From the main menu, select Security > Traffic Control > Protected Port. A screen similar to the
following displays.
15-12
v1.0, October 2009
Security Management