NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 28-35
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
9.
Enable PIM-DM globally.
a.
From the main menu, select Routing > Multicast >PIM-DM->Global Configuration. A screen
similar to the following displays.
Figure 28-36
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
10. Enable PIM-DM on the interface 1/0/21,1/0/22 and 1/0/24.
28-25
v1.0, October 2009
PIM