NETGEAR Managed Switches Software Administration Manual, Release 8.0
3.
Configure MST Port.
a.
From the main menu, select Switching > STP > MST Port Status. A screen similar to the following
displays.
Figure 25-7
4. Under MST Port Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. Now 1/0/3 appears in the Interface field at the top.
5. Enter the following information in the MST Port Status.
•
In the Port Priority field, enter 128.
•
In the Port Path Cost field, enter 0.
6.
Click Apply.
25-7
v1.0, October 2009
Spanning Tree Protocol