NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 15-1
b. Under Port Security Configuration, next to the Port Security Mode, select Enable radio button.
c.
Click Apply to save the settings.
2. Set dynamic and static limit on the port 1/0/1
a.
From the main menu, select Security > Traffic Control >Port Security->Interface Configuration. A
screen similar to the following displays.
Figure 15-2
b. Under Port Security Interface Configuration, scroll down to interface 1/0/1 and select the checkbox
for 1/0/1. 1/0/1 now appears in the Interface field at the top.
c.
Enter the following information in the Interface Configuration.
•
Select the Enable in the Port Security field.
•
In the Max Allowed Dynamically Learned MAC field, enter 10.
•
In the Max Allowed Statically Locked MAC filed, enter 3.
d. Click Apply to save the settings.
Security Management
v1.0, October 2009
15-3