NETGEAR FSM7328SNA Administration Manual page 484

NETGEAR Managed Switches Software Administration Manual, Release 8.0
c. In the PIM-SM Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
9. Candidate RP Configuration.
a. From the main menu, select Routing > Multicast >PIM-SM->Candidate RP Configuration. A
screen similar to the following displays.
Figure 28-59
b. Select 1/0/11 in the Interface field.
c. In the Group IP, enter 225.1.1.1.
d. In the Group Mask, enter 255.255.255.0.
e. Click Add.
10. BSR Candidate Configuration.
a. From the main menu, select Routing > Multicast >PIM-SM->BSR Candidate Configuration. A
screen similar to the following displays.
28-43
v1.0, October 2009
PIM