NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-30
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 38.
•
In the IP Address field, enter 10.100.5.34.
•
In the Network Mask field, enter 255.255.255.0.
c.
Click Unit 1. The ports display.
d. Click the gray box under port 38 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e.
Click Apply to save VLAN 38.
4. Enable IP Routing:
a.
From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the
following displays.
Figure 11-31
Access Control Lists (ACLs)
v1.0, October 2009
11-31