NETGEAR FSM7328SNA Administration Manual page 279

NETGEAR Managed Switches Software Administration Manual, Release 8.0
CLI: Configuring the Switch with an External Multicast Router
This example configures the interface as the one the multicast router is attached to. All IGMP packets
snooped by the switch will be forwarded to the multicast router reachable from this interface.
(Netgear Switch)(Interface 1/0/3)# ip igmp mrouter interface
Web Interface: Configuring the Switch with an External Multicast Router
To use the Web interface to configure the managed switch, proceed as follows:
1. From the main menu, select Switching > Multicast > Multicast Router Configuration. A screen similar
to the following displays.
Figure 14-4
2. Under Multicast Router Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. Now 1/0/3 appears in the Interface field at the top.
3. In the Multicast Router field, select Enable.
4. Click Apply.
IGMP Snooping and Querier
v1.0, October 2009
14-5