NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > IPv6 >Advanced>Tunnel Configuration. A screen similar to
the following displays.
Figure 26-10
b. Select 0 in the Tunnel Id field.
c.
Select 6-in-4-configured in the Mode field.
d. In the Source Address field, enter 192.168.1.2.
e.
In the Destination Address field, enter 192.168.1.1.
f.
Click Apply.
5. Assign an IPv6 address to the tunnel.
a.
From the main menu, select Routing > IPv6 > Advanced > Prefix Configuration. A screen similar
to the following displays.
Figure 26-11
b. Select 0/7/1 in the Interface field.
26-8
v1.0, October 2009
Tunnel