NETGEAR FSM7328SNA Administration Manual page 532

NETGEAR Managed Switches Software Administration Manual, Release 8.0
On Switch B
Create the routing port 1/0/13 and 1/0/20.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#routing
(Netgear Switch) (Interface 1/0/13)#ip address 192.168.2.2 255.255.255.0
(Netgear Switch) (Interface 1/0/13)#exit
(Netgear Switch) (Config)#interface 1/0/20
(Netgear Switch) (Interface 1/0/20)#routing
(Netgear Switch) (Interface 1/0/20)#ip address 192.l.168.4.1 255.255.255.0
(Netgear Switch) (Interface 1/0/20)#exit
(Netgear Switch) (Config)#exit
Enable ip multicast forwarding on the switch.
(Netgear Switch) (Config)#ip multicast
Enable DVMRP protocol on the switch.
(Netgear Switch) (Config)#ip dvmrp
Enable DVMRP mode on the interface 1/0/13 and 1/0/20.
(Netgear Switch) (Config)#interface 1/0/13
(Netgear Switch) (Interface 1/0/13)#ip dvmrp
(Netgear Switch) (Interface 1/0/13)#ex
(Netgear Switch) (Config)#interface 1/0/20
(Netgear Switch) (Interface 1/0/20)#ip dvmrp
(Netgear Switch) (Interface 1/0/20)#exit
(Netgear Switch) (Config)#exit
31-4
v1.0, October 2009
DVMRP