NETGEAR FSM7328SNA Administration Manual page 548

7000 series managed switch administration guide for software version 8.0

Table of Contents

NETGEAR Managed Switches Software Administration Manual, Release 8.0

Select Enable in the Interface Mode field.

d. Click Apply to save the settings.

8. Enable IGMP on the switch.

From the main menu, select Routing > Multicast >IGMP>Global Configuration. A screen similar

to the following displays.

Figure 31-22

b. Next to the Admin Mode, select the Enable radio button.

Click Apply.

Enable IGMP on the interface.

From the main menu, select Routing > Multicast >IGMP>Routing INterface Configuration. A

screen similar to the following displays.

Figure 31-23

b. Under IGMP Interface Configuration, scroll down to interface 1/0/24 and select the 1/0/24

checkbox. Now 1/0/24 appears in the Interface field at the top.

Select Enable in the Admin Mode field.

d. Click Apply to save the settings.

v1.0, October 2009