NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 15-34
b. Next to the Administrative Mode, select the Enable radio button.
c.
Next to the VLAN Assignment Mode, select the Enable radio button.
d. Click Apply to save settings.
5. Configure dot1x authentication list.
a.
From the main menu, select Security > Management Security > Authentication List> Dot1x
Authentication List. A screen similar to the following displays.
Figure 15-35
b. Select the check box before defaultList.
c.
Select RADIUS in the 1 field.
d. Click Add.
6. Configure RADIUS authentication server.
15-32
v1.0, October 2009
Security Management