NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > IP v6>Advanced > Prefix Configuration. A screen similar to
the following displays.
Figure 30-6
b. Under IPv6 Interface Selection, select the 1/0/13 in the Interface field.
c.
Enter the following information in the IP Interface Configuration.
•
In the IPv6 Prefix, enter 2001:2::1.
•
In the Prefix Length, enter 64.
•
Select Disable in the EUI64 field.
d. Click Add to save the settings.
6. Configure router ID of OSPFv3.
a.
From the main menu, select Routing > OSPFv3 >Basic > OSPFv3 Configuration. A screen similar
to the following displays.
Figure 30-7
b. In the Router ID field, enter 1.1.1.1.
c.
Next to the Admin Mode, select the Enable radio button.
d. Click Apply.
MLD
v1.0, October 2009
30-8