NETGEAR FSM7328SNA Administration Manual page 521

NETGEAR Managed Switches Software Administration Manual, Release 8.0
7. Enable OSPFv3 on the interface 1/0/21 and 1/0/24.
a. From the main menu, select Routing > OSPFv3 >Advanced > Interface Configuration. A screen
similar to the following displays.
Figure 30-18
b. Under OSPFv3 Interface Configuration, scroll down to interface 1/0/21 and select the checkbox for
1/0/21. Then select the checkbox for 1/0/24.
c. In the OSPFv3 Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
8. Enable multicast globally.
a. From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 30-19
b. Next to the Admin Mode, select the Enable radio button.
c. Click Apply.
9. Enable PIM-DM globally.
MLD
v1.0, October 2009
30-16