NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > Multicast >DVMRP>Global Configuration. A screen
similar to the following displays.
Figure 31-20
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
7.
Enable DVMRP on the interface.
a.
From the main menu, select Routing > Multicast >DVMRP>Interface Configuration. A screen
similar to the following displays.
Figure 31-21
b. Under DVMRP Interface Configuration, scroll down to interface 1/0/3 and select the 1/0/3
checkbox. Select the 1/0/11 checkbox and the 1/0/24 checkbox.
DVMRP
v1.0, October 2009
31-19