NETGEAR FSM7328SNA Administration Manual page 321

7000 series managed switch administration guide for software version 8.0

Table of Contents

NETGEAR Managed Switches Software Administration Manual, Release 8.0

In the VLAN Configuration table, set DHCP Snooping Mode as Enable. A screen similar to the

following displays.

Figure 15-40

3. Configure the port through which DHCP server is reached as trusted. Here Interface 1/0/1 is trusted.

From the main menu, select Security > Control > DHCP Snooping Interface Configuration. A

screen similar to the following displays.

Figure 15-41

b. Select the checkbox for Interface 1/0/1.

Set the Trust Mode as Enable for Interface 1/0/1.

Security Management

v1.0, October 2009