NETGEAR Managed Switches Software Administration Manual, Release 8.0
Web Interface: Manually Adding a Host Name and an IP Address
To use the Web interface to manually add a host name and an IP address, proceed as follows:
1.
From the main menu, select System > Management > DNS > Host Configuration. A screen similar to
the following displays.
Figure 21-2
2.
Under DNS Host Configuration, enter the following information:
•
In the Host Name field, enter www.netgear.com.
•
In the IP Address field, enter 206.82.202.46.
3.
Click Add.
The host name and IP address now show in the DNS Host Configuration table.
21-3
v1.0, October 2009
DNS