NETGEAR Managed Switches Software Administration Manual, Release 8.0
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
4. Create an authentication name list.
a.
From the main menu, select Security > Management Security > Login> Authentication List. A
screen similar to the following displays.
Figure 15-16
b. Select the checkbox before dot1xList.
c.
Select Radius in the 1 field.
d. Click Apply.
5.
Set the port 1/0/19 to the Force Authorized mode. (In this case, the Radius server is connected to this
interface.)
a.
From the main menu, select Security > Port Authentication > Advanced > Port Authentication. A
screen similar to the following displays.
Figure 15-17
b. Under Port Authentication, scroll down to interface 1/0/19 and select the checkbox for that
interface. Now 1/0/19 appears in the Interface field at the top.
c.
Under the Port Authentication, enter the following information.
Security Management
v1.0, October 2009
15-17