NETGEAR FSM7328SNA Administration Manual page 476

7000 series managed switch administration guide for software version 8.0

Table of Contents

NETGEAR Managed Switches Software Administration Manual, Release 8.0

Figure 28-44

b. Under IP Interface Configuration, scroll down to interface 1/0/13 and select the checkbox for 1/0/

13. 1/0/13 now appears in the Interface field at the top.

Enter the following information in the IP Interface Configuration.

In the IP address, enter 192.168.1.2.

In the Subnet Mask, enter 255.255.255.0.

Select Enable in the Routing Mode field.

d. Click Apply to save the settings.

Enable rip on the interface 1/0/1.

From the main menu, select Routing >RIP >Advanced > Interface Configuration. A screen similar

to the following displays.

Figure 28-45

b. Select 1/0/1 in the Interface field.

Next to the RIP Admin Mode, select the Enable radio button.

d. Click Apply.

v1.0, October 2009