NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 8-38
b. Under IP Interface Configuration, scroll down to interface 1/0/11 and select the checkbox for that
interface. Now 1/0/11 appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.168.30.1.
•
In the Network Mask field, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
3. Assign IP address 192.168.20.2 to the port 1/0/15.
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 8-39
b. Under IP Interface Configuration, scroll down to interface 1/0/15 and select the checkbox for that
interface. Now 1/0/15 appears in the Interface field at the top.
OSPF
v1.0, October 2009
8-32