NETGEAR Managed Switches Software Administration Manual, Release 8.0
f.
Select Source L4 Port as http. A screen similar to the following displays.
Figure 11-74
g.
Click Apply.
5. Apply the rules to inbound traffic on port 1/0/1. Only traffic matching the criteria will be accepted.
a.
From the main menu, select Security > ACL > Advanced > IP Binding Configuration.
b. For the ACL ID, select ipv6-acl.
c.
In the Sequence Number field, select 1.
d. Click Unit 1.
e.
Select Port 1. A screen similar to the following displays.
Figure 11-75
Access Control Lists (ACLs)
v1.0, October 2009
11-61