NETGEAR FSM7328SNA Administration Manual page 176

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-13
b. Under Configure Routes, make the following selection and enter the following information:
• Select Static in the Route Type field.
• In the Network Address field, enter 192.168.50.0.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Next Hop IP Address field, enter 192.168.200.2.
c. Click Add.
7. Create an ACL with ID 101.
a. From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
following displays.
Figure 11-14
b. In the IP ACL ID field of the IP ACL Table, enter 101.
c. Click Add.
11-16
v1.0, October 2009
Access Control Lists (ACLs)