NETGEAR FSM7328SNA Administration Manual page 295

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 15-8
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 202.
• In the IP Address field, enter 10.100.5.34.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display:
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e. Click Apply to save the VLAN that includes port 48.
4. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the
following displays.
Figure 15-9
Security Management
v1.0, October 2009
15-11