NETGEAR FSM7328SNA Administration Manual page 544

NETGEAR Managed Switches Software Administration Manual, Release 8.0
On Switch C:
To use the Web interface to config DVMRP, proceed as follows:
1. Enable IP routing on the switch.
a. From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
Figure 31-15
b. Next to the Routing Mode, select the Enable radio button.
c. Click Apply.
2. Configure 1/0/11 as a routing port and assign IP address to it.
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 31-16
b. Under IP Interface Configuration, scroll down to interface 1/0/11 and select the 1/0/11checkbox.
Now 1/0/11 appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration.
• In the IP address, enter 192.168.3.1.
31-16
v1.0, October 2009
DVMRP