NETGEAR Managed Switches Software Administration Manual, Release 8.0
c.
In the IPv6 Prefix field, enter 2000::1.
d. In the Length field, enter 64.
e.
Select Disable in EUI64 field.
f.
Click Add.
On GSM7328S_2
To use the Web interface to create a tunnel, proceed as follows:
1.
Enable IP routing on the switch.
a.
From the main menu, select Routing > IP >Basic>IP Configuration. A screen similar to the
following displays.
Figure 26-7
b. Next to the Routing Mode, select the Enable Radio button.
c.
Click Apply.
2.
Enable IPv6 forwarding and unicast routing on the switch.
26-6
v1.0, October 2009
Tunnel