NETGEAR FSM7328SNA Administration Manual page 185

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-25
b. Under Configure Routes, make the following selection and enter the following information:
• Select Static in the Route Type field.
• In the Network Address field, enter 192.168.100.0.
• In the Subnet Mask field, enter 255.255.255.0.
• In the Next Hop IP Address field, enter 192.168.200.1.
c. Click Add.
5. Create a static route with IP address 192.168.30.0/24:
a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen
similar to the following displays.
Figure 11-26
Access Control Lists (ACLs)
v1.0, October 2009
11-25