NETGEAR Managed Switches Software Administration Manual, Release 8.0
c.
Select Static in the VLAN Type field.
d. Click Add.
3. Setting force authorized mode on the port 1/0/6 and 1/0/12.
a.
From the main menu, select Security > Port Authentication > Advanced>Port Authentication. A
screen similar to the following displays.
Figure 15-33
b. Under Port Authentication, scroll down to interface 1/0/6 and 1/0/12, select the checkbox for that
interface.
c.
Under Port Authentication, select Force Authorized in the Control Mode field.
d. Click Apply to save settings.
4. Enable dot1x on the switch.
Make sure 1/0/12 and 1/0/6 is configured as force authorized before you do this step, otherwise you
cannot access the switch through GUI.
a.
From the main menu, select Security > Port Authentication > Basic>802.1x Configuration. A
screen similar to the following displays.
Security Management
v1.0, October 2009
15-31