NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under DVMRP Interface Configuration, scroll down to interface 1/0/1 and select the 1/0/1
checkbox. Select the 1/0/13 checkbox and the 1/0/21 checkbox.
c.
Select Enable in the Interface Mode field.
d. Click Apply to save the settings.
On Switch B
To use the Web interface to config DVMRP, proceed as follows:
1.
Enable IP routing on the switch.
a.
From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
Figure 31-9
b. Next to the Routing Mode, select the Enable radio button.
c.
Click Apply.
2.
Configure 1/0/13 as a routing port and assign IP address to it.
31-12
v1.0, October 2009
DVMRP