NETGEAR FSM7328SNA Administration Manual page 538

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 31-5
b. Under IP Interface Configuration, scroll down to interface 1/0/13 and select the checkbox for 1/0/
13. Now 1/0/13 appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration.
• In the IP address, enter 192.168.3.2.
• In the Subnet Mask, enter 255.255.255.0.
• Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
5. Enable IP multicast on the switch.
a. From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 31-6
31-10
v1.0, October 2009
DVMRP