NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 15-14
b. Under IP Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for that
interface. Now 1/0/1 appears in the Interface field at the top.
c.
Under the IP Interface Configuration, enter the following information.
•
Enter 192.168.1.1 in the IP Address field.
•
Enter 255.255.255.0 in the Subnet Mask.
•
Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
3. Assign IP address 10.100.5.33/24 to the interface 1/0/19
a. From the main menu, select Routing > Advanced >IP Interface Configuration. A screen similar to
the following displays.
Figure 15-15
b. Under IP Interface Configuration, scroll down to interface 1/0/19 and select the checkbox for that
interface. Nnow 1/0/19appears in the Interface field at the top.
c.
Under the IP Interface Configuration, enter the following information.
•
In the IP Address field, enter 10.100.5.33.
•
In the Subnet Mask, enter 255.255.255.0.
15-16
v1.0, October 2009
Security Management