NETGEAR FSM7328SNA Administration Manual page 408

NETGEAR Managed Switches Software Administration Manual, Release 8.0
3. Change the Port VLAN ID (PVID) of port 24 to 200:
a. From the main menu, select Switching > VLAN > Advanced > Port PVID Configuration. A screen
similar to the following displays.
Figure 23-4
b. Under PVID Configuration, scroll down to interface 1/0/24 and select the chechbox for that
interface. Now 1/0/24 appears in the Interface field at the top.
c. Under PVID Configuration, in the PVID (1 to 4093) field, enter 200.
d. Click Apply to save the settings.
4. Configure port 48 as the provider service port:
a. From the main menu, select Switching > VLAN > Advanced > Port DVLAN Configuration. A
23-5
v1.0, October 2009
Double VLANs