NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Security > ACL > Advanced > IP Extended Rules. A screen similar to
the following displays.
Figure 11-61
b. Click Add to take the Extended ACL Rule Configuration screen similar to the following displays.
Figure 11-62
c.
Enter Rule ID as 1.
d. Selection Action as Permit.
e.
Select Redirect Interface as 1/0/19.
f.
Select Dst L4 Port as http.
g.
Click Apply. At the end of this configuration a screen similar to the one in
3. Create a rule to match every other traffic.
11-52
v1.0, October 2009
Figure 11-63
displays.
Access Control Lists (ACLs)