NETGEAR FSM7328SNA Administration Manual page 463

NETGEAR Managed Switches Software Administration Manual, Release 8.0
c. Enter the following information in the IP Interface Configuration.
• In the IP address, enter 192.168.2.1.
• In the Subnet Mask, enter 255.255.255.0.
• Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
3. Configure 1/0/22 as a routing port and assign IP address to it.
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 28-30
b. Under IP Interface Configuration, scroll down to interface 1/0/22and select the checkbox for 1/0/
22. 1/0/22 now appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration.
• In the IP address, enter 192.168.6.2.
• In the Subnet Mask, enter 255.255.255.0.
• Select Enable in the Routing Mode field.
d. Click Apply to save the settings.
4. Configure 1/0/24 as a routing port and assign IP address to it.
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
PIM
v1.0, October 2009
28-22