NETGEAR FSM7328SNA Administration Manual page 523

NETGEAR Managed Switches Software Administration Manual, Release 8.0
c. In the PIM-DM Interface Configuration, select Enable in the Admin Mode field.
d. Click Apply to save the settings.
11. Enable MLD on the switch.
a. From the main menu, select Routing >Multicast >MLD >Global configuration. A screen similar to
the following displays.
Figure 30-22
b. Next to the Admin Mode, select the Enable radio button.
c. Click Apply.
12. Enable MLD on the interface 1/0/24.
a. From the main menu, select Routing > Multicast >MLD > Routing Interface Configuration. A
screen similar to the following displays.
Figure 30-23
b. Under MLD Routing Interface Configuration, scroll down to interface 1/0/24 and select the
checkbox for 1/0/24. Now 1/0/24 appears in the Interface field at the top.
MLD
v1.0, October 2009
30-18