NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. Now 1/0/2 appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.2.
•
Select the Enable in the OSPF Admin Mode field.
•
In the Priority field, enter 128.
•
In the Metric Cost field, enter 32.
c.
Click Apply button to save the settings.
7. Enable OSPF on the port 1/0/3.
a.
From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
Figure 8-14
b. Under Interface Configuration, scroll down to interface 1/0/3 and select the checkbox for that
interface. Now 1/0/3 appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.3.
•
Select the Enable in the OSPF Admin Mode field.
•
In the Priority field, enter 255.
•
In the Metric Cost field, enter 64.
c.
Click Apply button to save the settings.
8. Enable OSPF on the port 1/0/4.
a.
From the main menu, select Routing > OSPF > Advanced> Interface Configuration. A screen
similar to the following displays.
OSPF
v1.0, October 2009
8-14