NETGEAR FSM7328SNA Administration Manual page 329

NETGEAR Managed Switches Software Administration Manual, Release 8.0
c. Click Apply. A screen similar to the one in
2. Enable DHCP snooping in a VLAN.
a. From the main menu, select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays. "
Figure 15-53
b. In the VLAN Configuration table, select VLAN ID as 1.
c. In the VLAN Configuration table, set DHCP Snooping Mode as Enabled. A screen similar to the
following displays.
Figure 15-54
d. Click Apply.
3. Configure the port through which DHCP server is reached as trusted.
Security Management
Figure 15-53 displays.
v1.0, October 2009
15-45