NETGEAR Managed Switches Software Administration Manual, Release 8.0
1.
Enable IP routing on the switch:
a.
From the main menu, select Routing > IP > IP Configuration. A screen similar to the following
displays.
Figure 8-2
b. Next to the Routing Mode, select the Enable radio button.
c.
Click Apply to save the settings.
2. Assign IP address 192.150.2.1 to the port 1/0/2.
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 8-3
b. Under IP Interface Configuration, scroll down to interface 1/0/2 and select the checkbox for that
interface. Now 1/0/2 appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration:
•
In the IP Address field, enter 192.150.2.1.
•
In the Subnet Mask field, enter 255.255.255.0.
•
Select Enable in the Administrative Mode field.
OSPF
v1.0, October 2009
8-4